 Arintha system offers custom fabrication and advanced material handling design, equipment food processing, cyclone, storage tank, bins, stainless steel food service equipment, longpan aluminum services to our customers. Custom fabrication is important when you require a piece of material handling equipment that is not standard. From a specialized transfer car to a unique pallet dispenser Bastian can handle all of your needs. We not only design it but we build it as well. We are your manufacturer for custom fabrication in the material handling industry.
Fabrication chutes are used for controlling dust during bulk material handling:
Spiral chutes are used to prevent breakage of fragile or soft material.
Bin-lowering chutes are used to feed bins and hoppers without generating large amounts of dust. These chutes consist of a channel that runs from the discharging equipment down into the bin. The channel is secured to the sloping side of the bin.
Rock ladders are used to prevent breaking and crumbling of rock. They consist of a steel tower with a series of baffles arranged so the discharged rock never has a free drop of more than 1.5m to 1.8 m. This lower drop height significantly reduces dust.
Telescopic chutes are used to minimize the height of material fall into stockpiles. The telescopic sections are usually cable-connected so a winch can lift the sections of the chute. The lower end of the chute is always kept just clear of the top of the stockpile to reduce dust.
Storage Bins and Hoppers
Arintha system Bins and hoppers are used to store ore temporarily. They act as buffers to absorb the surge between unloading and consumption. The ore is fed into the bin by various equipment, such as conveyors, elevators, and screens. The material is normally discharged from bins and hoppers through gravity or vibrating feeders.
Emission Points, Bins and hoppers primarily emit dust from : Feed openings, Discharge feeder Inspection doors.
|
FABRICATION